Huber Heights

Local Reviews
for Huber Heights, OH


Josh A.

Josh A.

I replaced the contactor on a heat pump. No one home so I was unable to test it.

Near Huber Heights, OH 45424
Huber Heights, OH - I replaced the contactor on a heat pump. No one home so I was unable to test it.
Josh A.

Josh A.

I completed a diagnostic on an air conditioner. Determined that the OEM High Voltage Electro-Magnetic Contactor 1Pole needed replaced. Corrected wiring issue. System is operational at the time of departure.

Near Huber Heights, OH 45424
Huber Heights, OH - I completed a diagnostic on an air conditioner.  Determined that the OEM High Voltage Electro-Magnetic Contactor 1Pole needed replaced. Corrected wiring issue. System is operational at the time of departure.
Mike H.

Mike H.

Upon inspection, I found the schrader valve needed replaced. I informed the customer and they approved the replacement. I cycled the system to ensure functionality. System is operational upon departure.

Near Huber Heights, OH 45424
Huber Heights, OH - Upon inspection, I found the schrader valve needed replaced. I informed the customer and they approved the replacement. I cycled the system to ensure functionality. System is operational upon departure.
Mike H.

Mike H.

I performed a tune up on a Comfortmaker air conditioner. I found the refrigerant was a little low and added some to the system with customer's permission. Everything else checked out within specs. System is operational upon departure.

Near Huber Heights, OH 45424
Huber Heights, OH - I performed a tune up on a Comfortmaker air conditioner. I found the refrigerant was a little low and added some to the system with customer's permission. Everything else checked out within specs. System is operational upon departure.
Dakota J.

Dakota J.

Installed a Five Star brand variable-speed electric furnace for customer. ION system control thermostat, and Five Star brand ION variable-speed heat pump. Customer receiving a 1-year scheduled maintenance agreement free with install.

Near Huber Heights, OH 45424
Huber Heights, OH - Installed a Five Star brand variable-speed electric furnace for customer. ION system control thermostat, and Five Star brand ION variable-speed heat pump. Customer receiving a 1-year scheduled maintenance agreement free with install.
Josh A.

Josh A.

I replaced fuse and installed customer provided thermostat.

Near Huber Heights, OH 45424
Dakota J.

Dakota J.

I installed a Carrier Multi-Speed X-13 2 Ton Electric Furnace and a Carrier 14 SEER 2 Ton Heat Pump.

Near Huber Heights, OH 45424
Huber Heights, OH - I installed a Carrier Multi-Speed X-13 2 Ton Electric Furnace and a Carrier 14 SEER 2 Ton Heat Pump.
Dakota J.

Dakota J.

I installed Five Star 80% 70,000 BTU Gas Furnace 3T 14"

Near Huber Heights, OH 45424
Huber Heights, OH - I installed Five Star 80% 70,000 BTU Gas Furnace 3T 14"
Mike H.

Mike H.

Believe board may be issue. Called field supervisor and he instructed to call dispatch and have them reach out to customer to schedule us to come back out with supervisor. At time of departure furnace operational but only has 1st stage

Near Huber Heights, OH 45424
Huber Heights, OH -  Believe board may be issue. Called field supervisor and he instructed to call dispatch and have them reach out to customer to schedule us to come back out with supervisor. At time of departure furnace operational but only has 1st stage
Josh A.

Josh A.

Customers system had stopped working. Customer inquired why he had not received his fall tuneup yet. He further advised that Someone told him we would contact him when it was time, and that he had not been contacted. Wondered if his tuneup, would have prevented the problem. System was cycling on and off due to flame sensor which tested 0.042. Pulled and cleaned. Sensor now tests 4.1. Went ahead and conducted the customers fall tuneup and and advised him there will be no charge for the diagnostic. Advised the office that the customer has now received his fall sma tuneup.

Near Huber Heights, OH 45424
Huber Heights, OH - Customers system had stopped working. Customer inquired why he had not received his fall tuneup yet. He further advised that Someone told him we would contact him when it was time, and that he had not been contacted. Wondered if his tuneup, would have prevented the problem. System was cycling on and off due to flame sensor which tested 0.042. Pulled and cleaned. Sensor now tests 4.1. Went ahead and conducted the customers fall tuneup and and advised him there will be no charge for the diagnostic. Advised the office that the customer has now received his fall sma tuneup.